6
4. remove the machine from the packaging;
5. clean the outside of the machine in respect of safety regulations;
6. after unpacking the machine, install the batteries (battery models) See relevant sections.
The packaging may be kept as it can be reused to protect the machine if it is moved to another site
or to a repair workshop.
Otherwise it must be disposed off in compliance with current legislation.
Check that all switches on the control panel are in the “0” (off) position. Make sure you
connect the terminals marked with a “+” to the positive poles of the battery. Do not check
the battery charge by sparking. Meticulously follow the instructions given below as short
circuiting the batteries could cause them to explode.
Danger
•
Make sure the recovery tank is empty and empty if necessary (see relevant paragraph).
•
Lift the recovery tank (ref. 1) off the solution tank by pulling it upwards, making sure you have
previously removed the suction hose and recovery tank drain hose from their housings.
•
Place the batteries in the battery compartment.
Important
Mount the batteries on the machine using lifting means suitable for their weight.
The positive and negative poles have different diameters.
1. Connect the battery wiring and bridge terminals to the battery poles. Tighten the terminals on the
poles and cover with Vaseline.
2. Put the recovery tank back on the solution tank.
Summary of Contents for 19352-C-AGM
Page 2: ......
