background image

3

PRODUCT SPECIFIC SAFETY WARNINGS

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, basic precautions should always be followed, including the following: 

READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE)

Failure to understand and follow all safety warnings and instructions 

could result in fire, electrical shock or serious injury.

Electrical/Grounding

>  Connect to a properly grounded outlet only. See 

  Grounding Instructions (p. 8).

>  Improper connection of the equipment-grounding 

  conductor can result in a risk of electric shock. Check 

  with a qualified electrician or service person if you are in 

  doubt as to whether the outlet is properly grounded. Do 

  not modify the plug provided with the appliance – if it will 

  not fit the outlet, have a proper outlet installed by a 

  qualified electrician.

>  Do NOT use outdoors or on wet surfaces.

>  Do NOT use with damaged cord or plug. If appliance is 

  not working as it should, has been dropped, damaged, left 

  outdoors, or dropped into water, it must be serviced by a 

  qualified provider.

>  Make sure the Main Power Switch is in the OFF position 

  before connecting the machine to the power source.

>  Do NOT pull or carry by cord, use cord as a handle, close 

  a door on cord, or pull cord around sharp edges or corners. 

  Do NOT run appliance over cord. Keep cord away from 

  heated surfaces.

>  Do NOT unplug by pulling on cord. To unplug, grasp 

  the plug, not the cord.

>  Do NOT handle plug or appliance with wet hands.

>  If connected to a circuit protected by fuses, use time-delay 

  fuses, marked Type D, with this appliance.

>  The use of extension cords is discouraged; try to position 

  the machine near the power source. If an extension cord 

  is necessary, use only three-wire extension cords that have 

  three-prong grounding plugs and three-pole receptacles 

  that accept the tool’s plug.

>  Extension cords in poor condition or that are too small can 

  pose fire and shock hazards. When using an extension 

  cord, be sure it is in good condition and properly rated.

Safe Use

>  Do NOT use to pick up liquids, flammable or combustible 

  liquids or materials, such as gasoline, or use in areas where 

  they may be present. Do NOT use to pick up anything that 

  is burning or smoking, or toxic materials. Do NOT use to 

  pick up metal items/shavings. Items not to be picked 

  up with this machine include (but are not necessarily 

  limited to):

  •  Fuels 

•  Lighter fluid 

•  Cleaners

  •  Oil-based paints  •  Natural gas 

•  Hydrogen 

  •  Coal dust 

•  Magnesium dust  •  Grain dust 

  •  Gunpowder 

•  Cigarettes 

•  Matches

  • Hot ashes

>  Do NOT leave appliance when plugged in. Unplug from 

  outlet when not in use and before servicing.

>  NEVER leave tool running and unattended.

>  Turn off all controls before unplugging.

>  Do NOT put any object into openings. Do NOT use with 

  any opening blocked; keep free of dust, lint, hair, and 

  anything that may reduce airflow.

>  Remove all jewelry, secure loose clothing and tie up long 

  hair before using this machine. To avoid serious injury, 

  keep hair, loose clothing, fingers, and all parts of body 

  away from openings and moving parts.

>  NEVER operate without hose connected to suction 

  chute (inlet). Hazardous moving parts inside. Unplug 

  before removing hose from suction chute; attach hose 

  on the suction chute before plugging in.

>  Do NOT use without dust bag mounted in place.

>  Wear approved safety glasses, dust mask or respirator 

  and hearing protection while using this machine or 

  emptying the dust bag.

>  For household use only.

Product Specific Safety Warnings continued on page 4

Summary of Contents for 650 CFM









Reviews: