Durr Dental Power Tower Silence 200, Installation And Operating Instructions Manual

Page: 13 / 48

A949100002L02 1806V002
11
Assembly
i
Connect the exhaust air and secretion hose to
the floor connection.
i
Place the unit in the correct position and align.
Observe planning template 9000-619-09.
≤100
7 Installation
7.1 Combining devices safely
Take care when connecting units together or to
parts of other systems as there is always an ele-
ment of risk (e.g. due to leakage currents).
i
Only connect units when there can be no
question of danger to operator or to patient.
i
Only connect units when it is safe to do so
and when there is no risk of damage or harm
to the surroundings.
i
If it is not 100% clear from the unit data sheet
that such connections can be safely made or
if you are in any doubt, always get a suitably
qualified person (e.g. the manufacturer) to ver-
ify that the setup is safe.
7.2 Set up and connect the suction
module
i
Erect the suction module.
i
Connect the exhaust air and secretion hose.
i
Remove the transport protection.
i
Attach the cover at the rear.
EN