Duronic PS410, Manual

Page: 4 / 33

4
Caution
Setup
1. Never allow children to shred or to play with the
paper shredder, or else, serious injury could occur.
2. Do not place hands or fingers into the shredder,
as it could result in serious injury.
3. Never spray canned air or any type of lubricant
into the shredder, while the shredder is plugged in.
4. Never place any lubricants or cleaning solutions
into the paper shredder, as it could result in serious injury.
5. Keep all loose articles of clothing;
ties, jewelry, hair or other items away from
the feed opening, in order to prevent injury.
6. Remove all paper clips and staples from paper before shredding.
The shredder will cut staples and small paper clips,
however, discretion is recommended.
7. Keep the shredder turned off or unplugged,
when not in use for prolonged periods of time.
8. When manually changing feed direction, pause long enough
for the motor to stop, to avoid possible damage to the motor.
9. Turn off and unplug the shredder prior to moving,
cleaning or emptying the wastebasket.
10. Empty the wastebasket frequently to avoid possible paper jams
caused by shredded material being pulled back into the cutter assembly.
1. The PS410 shredder should be placed on a flat, level surface.
Depending on the surface where the shredder is placed,
casters have been included, and can be installed with ease.
It is recommended that casters should be used,
if the shredder is being placed on a hard, smooth surface.
2. Ensure that the wastebasket is inserted into the
shredder and that it fits flush with the shredder cabinet.
3. Plug the power cord into a standard 230-240V AC outlet,
which should be installed near the equipment.
4. Place the power switch into the ON position,
the Power LED should light up.
You are now ready to start shredding.