Duronic JE2, Instruction Manual

Page: 7 / 48

7
First use
I. Remove all packaging and check that all parts are included.
II. Wash all removable parts and accessories in warm water and dry them
thoroughly. To prevent electric shock and damage, do not immerse the
main machine in water.
III. Before assembling the machine, make sure that the plug has inserted into
the socket and that the switch at the back is in the ‘O’-Assembly.
Make sure that all parts are installed correctly as follows:
1. Place the juicing bowl into the machine and make sure it cannot
move sideways (fig. 1)
2. Push the screening cylinder all the way into the spinning brush
locked into place (fig. 2
3. Align the spinning brush inside juicing bowl by matching the triangles
the top front (fig. 3
4. Push the rotor into the screening cylinder until it sits on the bottom
and only the little metal top sticks out of the cylinder (fig 4)
5. Insert the pusher into the feed inlet (fig 5)
6. Align the unlock-mark on feed inlet with the triangle on the juicing (fig 6)
7. A subtle rotation clockwise will close the cover (fig 7)
8. Attach the spout to the juicing bowl (fig 8)
1 2 3 4