Duronic FH2KW1, Manual

Page: 11 / 62

11
1. Before cleaning, turn off the heater. Unplug the power cable and allow the
heater to cool down.
2. Do not immerse the power cord, plug or the heater itself into water or any
liquid. Do not pour water or any liquid over the heater.
3. To clean the heater safely, use a vacuum cleaner to remove any dust and
lint on the grill/mesh cover. Wipe the heater with a dry cloth to remove any
extra dust and a damp (well wrung) cloth to clean off any stains.
4. Do not use detergents, abrasive cleaning products or any kind of polishing
material on the body of the heater as this can damage the finish.
1. Unplug the heater and wind up the power cable.
2. Store the heater in a cool dry place. Cover the heater to prevent dust
and dirt building up on the machine. Old packaging is ideal for using as a
cover.
Cleaning and Maintenance
Storage
Troubleshooting
Problem Possible Cause Solution
After the power has
been switched on,
the pilot light does
not illuminate and the
heater does not work.
1. The plug may not be
plugged in properly.
2. The temperature
control dial is not turned
into the right place.
1. Check whether the
plug is properly inserted
into the plug socket.
2. Check whether the
temperature control dial
is turned on
past
the
'MIN'
position.
The machine suddenly
stops during heating.
The temperature
exceeds the threshold
of the thermal cut-off.
Let the machine cool
down before using
again.