Duronic EPS, Manual, Page: 9 / 48

9
Cleaning
When not in use, keep your screen rolled up to keep it dust-free. If the screen
or casing gather dust, simply clean with a dry cloth or duster.
The screen is made of PVC. If the screen has a mark or stain that needs to
be removed, use a wet cloth with a mild soap to gently clean the screen. Use
minimal pressure to prevent damaging the fabric.
Do not use any abrasive chemicals or cleaning agents on any part of the
screen or casing.
Retract
Extend
Troubleshooting
Problem Solution
The screen does not
go up or down
If the screen is jammed and is stuck either fully
retracted or fully extended, then you will need to
contact Duronic directly for further advice.
Screen does not
extend to the correct
length
If the screen does not extend to the correct length,
try rolling the screen back up fully, then try again to
extend the screen.
Screen does not
completely retract
If the screen does not retract fully into the
projector casing, try to gently pull the screen down
completely and then try again to roll it back up into
the casing.