Duronic EPS, Manual, Page: 6 / 48

6
Before You Begin
Assembly Instructions
• Clear a large enough area to assemble the screen. Make sure the area is
larger than the sides of the screen.
• Assembly of the screen requires at least two people for some of the steps.
• Do not assemble the screen in areas of high temperature to avoid
incurring any damage to the screen.
• Ensure that you read through this manual entirely before beginning to
assemble the screen.
1. Ensure your assembly area is clean and completely clear.
2. Unpack all of the parts from the box and lay them out in an orderly way. Do
not unroll the screen yet.
3. Place the screen on the flat even surface. In order to protect the screen
from getting marked or stained, ensure that the screen is kept away from
dust and dirt.
4. Decide on a location for your screen. The MPS screen can be installed in
three ways:
Tools Required for Assembly
• Phillips screwdriver
• Spirit level • Allen key (included in the box)
• Drill (if installing onto a wall)