manualshive.com logo in svg

DUROMAX XP9000IH, User Manual, Page: 18 / 66

Share
Download
DUROMAX XP9000IH User Manual Download Page 18

GENERATOR COMPONENTS

18

2. Air Filter

6. Wheels

5. Power Panel

1. 

Battery Compartment

 - The 12V DC battery that powers the electric start system is located 

under this cover.

2. 

Air Filter/Spark Plug

 - The air filter a removable element that cleans the air going into the 

engine and the spark plug which provides ignition to the engine are under this cover.

3. 

Fuel Tank and Gauge - 

Indicates the amount of fuel in the gasoline tank.

4. 

Handles

 - Allow for easy steering during transportation.

5. 

Power Panel

 - Allows access to fill the gasoline tank.

6. 

Wheels

 - Solid wheels allow for easy transportation over any terrain.

7. 

Multimeter

 - Provides information of Hours Run, Voltage, Hertz, and current load on the 

generator measured in kW.

8. 

Start Up Switch

 - Allows power to the starter and panel.  Prevents accidental starting.

9. 

Circuit Breaker

 - Resettable switch that protects the generator from electrical overload.

10. 

Parallel Ports

 – Allow you to combine the output of two generators for maximum power.

11. 

USB Outlets

 – 5v DC Output in USB-A and USB-C for charging batteries or running USB 

powered items.

3. Handles

1. Battery Compartment

4. Fuel Tank

Summary of Contents for XP9000IH



































































Reviews:

No comments