manualshive.com logo in svg

DUROMAX XP9000IH, User Manual, Page: 17 / 66

Share
Download
DUROMAX XP9000IH User Manual Download Page 17

Press the start button

The start button is located on the left side of the power 
panel.  Press the button down for 1 - 3 seconds to start the 
generator.

8.

Connect devices

Connect your devices to the receptacles on the front panel. 

Start with the largest loads first.

10.

Turn start switch on

The start switch is located on the left side of the front 
power panel next to the Low Idle. Press the switch up to 
the start position to all the generator to start. 

7.

Turn breaker on

The breaker is located on the right side of the front power 

panel. Flip the breaker up to allow the power to flow to the 

receptacles.

9.

6.

Turn Low Idle off

The Low Idle is located on the left side of the front power 
panel, next to the breaker. Flip the switch down to disable 
Low idle when starting the generator.

Press the start button

The start button is located on the left side of the power 
panel.  Press the button down for 1 - 3 seconds to start the 
generator.

8.

Connect devices

Connect your devices to the receptacles on the front panel. 

Start with the largest loads first.

10.

Turn start switch on

The start switch is located on the left side of the front 
power panel next to the low idle. Press the switch up to 
the start position to all the generator to start. 

7.

Turn breaker on

The breaker is located in the top center of the front power 

panel. Flip the breaker up to allow the power to flow to the 

receptacles.

9.

6.

Turn low idle off

The low idle is located on the left side of the front power 
panel, next to the fuel choice switch. Flip the switch down 
to disable low idle when starting the generator.

17

Summary of Contents for XP9000IH



































































Reviews:

No comments