Connect propane tank
Screw the open ACME nut connection to your propane
tank and turn the tank on.
6.
19
Close choke
The choke lever is located above the air filter to the left
of the recoil start. Slide the lever to the left to cut the air
supply and allow more gas into the engine to start.
Turn breaker on / connect
The breaker is located on the right side of the front power
panel. Flip the breaker up to allow the power to flow to the
receptacles. Connect your devices to the receptacles on
the front panel. Start with the largest loads first.
10.
7.
Open choke
The choke lever is located above the air filter to the left
of the recoil start. Slide the lever to the right to open the
choke and increase air into the carburetor for normal
running.
9.
Start generator
The engine switch is located on the left side of the front
power panel. Press the top “Start” position on the rocker
switch to start the generator. Allow the switch to return to
the run position once started.
8.
Summary of Contents for XP4850HX
