DUROMAX XP18HP, User Manual

Page: 23 / 60

Pull the recoil start handle
Pull the recoil handle slowly until resistance is felt, then quickly
pull the recoil handle until fully extended. Continue this step
until the engine starts as needed.
5.
Move the choke lever to RUN
Adjust the throttle lever
After allowing the engine to preheat, move the choke lever
to the right-hand side to the “RUN” position to steady the
idle speed and run the engine.
Adjust the throttle lever to the proper position for the
desired speed and the engine is ready for use.
6.
7.
CAUTION : Release the recoil handle only after the cord
has retracted. Releasing the recoil handle while extended
may cause harm to yourself or your equipment.
23