DUROMAX XP15000E, User Manual

Page: 18 / 60

-20 20 40 60 80 0 100 F
-30 -40 -10 0 10 20 30 -20
40 C
30
10W-30
ENVIRONMENTAL TEMPERATURE
5W-30
SAE
GENERATOR SETUP (CONTINUED)
Add oil
The generator requires engine oil to operate properly. The generator, when new from the package
contains no oil in the crankcase
*
. You must add the proper amount of oil before operating the
generator for the first time. This amount is equal to the oil capacity of the engine crankcase:
WARNING: Do not apply engine oils with additives or 2-stroke gasoline engine oils. They don’t
have enough lubrication, and may shorten the engine’s service life.
a. Make sure the generator is on a level surface.
b. Unscrew the oil filler cap from the engine .
c. Using a funnel, add the appropriate amount of oil
into the crankcase. You can check the oil level of the
generator with the dipstick located below the oil
filler cap. Simply pull the dipstick out and the
indicated oil level is on the end of the stick.
d. Replace oil filler cap.
1.
Step 3 - Adding Oil
Engine oil recommended: SAE 10W-30. Viscosity varies with
regions and temperatures. Choose your oil viscosity using the
chart to the left.
* A small amount of oil from factory testing may be present on
arrival.
Model Number XP15000E
Engine Oil Capacity 54 fl. oz (1.6L)
18
WARNING: DO NOT overfill the crankcase. This
may damage the motor and shorting overall life
of your generator.