manualshive.com logo in svg

DUROMAX XP15000E, User Manual

Share
Download
DUROMAX XP15000E User Manual Download Page 12

9. Ground 

Terminal

3.  120V 3 Prong 

Twist Lock

GENERATOR COMPONENTS

12

14. Oil Fill and Dipstick

1. 

Propane Connector – Connects the LPG tank to the LPG Regulator.

2. 

Engine Switch – 3 Position Switch to “Start”, “Run”, or turn “Off” the generator.

3. 

120v 3-Prong Twist Lock - Use to connect electrical devices that run 120 Volt, 60 Hz, single 

phase, AC current (L5-30).

4. 

Fuel Select Switch - Use to select generator fuel source.

5. 

120v 3-Prong Receptacle - Use to connect electrical devices that run 120 Volt, 60 Hz, single 

phase, AC current (NEMA 5-20).

6. 

Digital Volt Meter/Hour Meter - Provides reading of voltage output and tracks operating 

hours.

7. 

Circuit Breaker - Resettable switch that protects the generator from electrical overload.

8. 

120/240v 4-Prong Receptacle - Use to connect electrical devices that run 120 or 240 Volt, 60Hz, 

single phase, AC current (NEMA 14-50).

9. 

Ground Terminal - Connect a ground wire here to properly ground the generator.

10. 

120/240v 4-Prong Twist Lock - Use to connect electrical devices that run 120 or 240 Volt, 60Hz, 

single phase, AC current (NEMA L14-30).

11. 

Battery - 12V DC 7ah Battery that powers the Electric Start System.

8. 120/240v 

4-Prong Receptacle

7. Circuit Breaker

11. Battery

10. 120/240v 

4-Prong Twist 

Lock

5. 120v 3-Prong 

Receptacle

2. Engine Switch

6. Digital Volt

Meter/ Hour Meter

12. Choke

13. Fuel Valve

Summary of Contents for XP15000E





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands