DUROMAX DuroStar DS13000DX User Manual Download Page 58

Page: 58 / 84

MAINTENANCE AND CARE (CONTINUED)

Spark Plug Maintenance

The spark plug is important for proper engine operation.
A good spark plug should be intact, free of deposits, and
properly gapped.

Remove spark plug cap

Remove spark plug

Inspect spark plug

Pull on the spark plug cap to remove it.

Unscrew the spark plug from the generator using the spark

plug wrench included with this product.

Visually inspect the spark plug. If it is cracked or chipped,

discard and replace it with a new spark plug. We recommend

using an F6RTC spark plug such as NGK BPR6ES.

CAUTION

: Improper maintenance may cause reduced fuel economy, misfires,

trouble starting, or damage to the spark plug threads.

SPARK PLUG

CONSULT MANUAL

BEFORE REMOVING

Summary of Contents for DuroStar DS13000DX





















































































Search results

Summary of Contents for DuroStar DS13000DX

Reviews:

Related manuals for DuroStar DS13000DX

Brands by name

Popular brands

DUROMAX DuroStar DS13000DX, User Manual

Search results

Summary of Contents for DuroStar DS13000DX

Reviews:

Related manuals for DuroStar DS13000DX

Brands by name

Popular brands