DUROMAX DUAL FUEL XP13000DX Page 19 User Manual Download | Manualshive

Page: 19 / 76

background image

19

GENERATOR SETUP

Unpack

a.

Remove the generator from the box.

b.

Place the largest piece of packing foam on a flat surface.

c.

Flip the generator upside down on the pad.

CAUTION: NEVER

attempt this if you have put fuel or oil in

the generator.

1.

Step 1 - Remove Shipping Braces

Remove Braces

The shipping braces prevent engine movement during
shipment. Flip the generator over and remove the brightly
colored braces between the motor and the frame, and the
wood brace under the generator.

2.

19

Note: Shipping braces can be thrown away.

They will not be needed again.

«
...
17
18
19
20
21
...
»

Summary of Contents for DUAL FUEL XP13000DX













































































Reviews:

No comments

Related manuals for DUAL FUEL XP13000DX

Brand: Axess Pages: 6

Brand: Marathon Electric Pages: 73

Brand: Firman Pages: 51

Brand: NextBase Pages: 54

Brand: bem wireless Pages: 5

Brand: Sangean Pages: 43

Power Systems KD Series

Brand: Kohler Pages: 4

Brand: Sangean Pages: 1

Brand: Sangean Pages: 1

Powermate PM0523202.17

Brand: Coleman Pages: 8

Brand: i-box Pages: 56

Brand: Honda Pages: 35

Brand: Audiovox Pages: 29

D7000XP - DVD Player - 7

Brand: Audiovox Pages: 33

Brand: Audiovox Pages: 34

Brand: Audiovox Pages: 35

D1810 - DVD Player - 8

Brand: Audiovox Pages: 32

D1817PK - DVD Player - 8

Brand: Audiovox Pages: 37

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands