manualshive.com logo in svg

DUROMAX DUAL FUEL HYBRID ELITE XP8500EH, User Manual

Share
Download
DUROMAX DUAL FUEL HYBRID ELITE XP8500EH User Manual Download Page 48

USING THE GENERATOR (CONTINUED)

Connecting a load to the generator

NOTE: Be sure to attach devices to the correct receptacle (outlet).

 

 

●

120v devices can be directly connected to the 120v ONLY receptacles. 

 

●

120v devices can be connected to the 120/240v receptacle using an appropriate adapter. 

 

●

240v devices can ONLY be connected to the 240v receptacle.

Plug in devices

Turn breaker on

Turn on connected devices

Plug in devices to the appropriate receptacle. When using 

the generator balance the load as closely as possible. Placing 

more load on one side of the circuit will reduce the breaker 

trip period.

Flip the circuit breaker up to the on position to allow power to 

the receptacles.

Start or turn on appliances starting with the biggest loads 

first.

1.

2.

3.

48

CAUTION

: Do not connect 50Hz or 3-phase loads to the generator.

Summary of Contents for DUAL FUEL HYBRID ELITE XP8500EH

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands