manualshive.com logo in svg

DUROMAX DUAL FUEL HYBRID ELITE XP8500EH, User Manual

Share
Download
DUROMAX DUAL FUEL HYBRID ELITE XP8500EH User Manual Download Page 20

18.  Muffler

GENERATOR COMPONENTS

20

2. Choke Lever 

1. Air Cleaner

10. Multimeter

8. 120v 3-Prong Recepticals

 

6. 120/240v 
4-Prong Twist Lock

5. Circuit Breaker

7. Ground Terminal

19. Power Boost Switch

9. Battery

12. Oil Fill and Dipstick

13. Engine Switch

14. Recoil Start

11. 12v DC

1. 

Air Cleaner

 - a removable, cleanable, oiled, element that cleans the air going into the engine.

2. 

Choke Lever

 - Allows the airflow into the carburetor to be restricted to assist in starting the 

engine.

3. 

Fuel Gauge

 - Indicates the amount of fuel in the gasoline tank.

4. 

Fuel Cap

 - Allows access to fill the gasoline tank.

5. 

Circuit Breaker

 - Resettable switch that protects the generator from electrical overload.

6. 

120/240v 4-Prong Twist Lock

 - Use to connect electrical devices that run 120 or 240 Volt, 60Hz, 

single phase, AC current (NEMA L14-30).

7. 

Ground Terminal

 - Connect a ground wire here to properly ground the generator.

8. 

120v 3-Prong Receptacles

 - Use to connect electrical devices that run 120 Volt, 60 Hz, single 

phase, AC current (NEMA 5-20).

9. 

Battery

 - 12V DC 9ah Battery that powers the Electric Start System.

10. 

Multimeter

 - Provides reading of voltage output, hertz, and hours run.

11. 

12v DC

 – Automotive 12v DC Output for running small DC powered items.

16. Fuel Valve

20. 5v USB

21. Propane Inlet

22. Idle Control

Summary of Contents for DUAL FUEL HYBRID ELITE XP8500EH

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands