manualshive.com logo in svg

DUROMAX DUAL FUEL HYBRID ELITE XP11500EH, User Manual

Share
Download
DUROMAX DUAL FUEL HYBRID ELITE XP11500EH User Manual Download Page 16

GENERATOR COMPONENTS

16

2. Choke Lever 

1. Air Filter

7. Multimeter

5. 120v 3-Prong 

Receptacle
6. 120/240v 4-Prong 
Receptacle

4. 120V 3-Prong 

Twist Lock

10. 120/240v 4-Prong 

Twist Lock

8. Circuit Breaker

9. Ground Terminal

11. Battery

13. Oil Fill and Dipstick

12. Engine Switch

14. Recoil Start

1. 

Air Cleaner

 - a removable, cleanable, oiled, element that cleans the air going into the engine.

2. 

Choke Lever

 - Allows the airflow into the carburetor to be restricted to assist in starting the 

engine.

3. 

Fuel Valve

 - On/Off Valve that allows fuel into the engine.

4. 

120v 3-Prong Twist Lock

 - Use to connect electrical devices that run 120 Volt, 60 Hz, single 

phase, AC current (L5-30).

5. 

120v 3-Prong Receptacle

 - Use to connect electrical devices that run 120 Volt, 60 Hz, single 

phase, AC current (NEMA 5-20).

6. 

120/240v 4-Prong Twist Lock

 - Use to connect electrical devices that run 120 or 240 Volt, 60Hz, 

single phase, AC current (NEMA L14-30).

7. 

Multimeter

 - Provides reading of voltage output (v), frequency (hz), and hours run. 

8. 

Circuit Breaker

 - Resettable switch that protects the generator from electrical overload.

9. 

Ground Terminal

 - Connect a ground wire here to properly ground the generator.

10. 

120/240v 4-Prong Receptacle

 - Use to connect electrical devices that run 120 or 240 Volt, 

60Hz, single phase, AC current (NEMA 14-50).

3. Fuel Valve

15.  Muffler

Summary of Contents for DUAL FUEL HYBRID ELITE XP11500EH













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands