manualshive.com logo in svg

DUROMAX DUAL FUEL HYBRID ELITE XP11500EH, User Manual

Share
Download
DUROMAX DUAL FUEL HYBRID ELITE XP11500EH User Manual Download Page 13

Close choke

The choke lever is located above the air filter to the left 

of the recoil start. Slide the lever to the left to cut the air 
supply and allow more gas into the engine to start.

6.

Open choke

The choke lever is located above the air filter to the left 

of the recoil start. Slide the lever to the right to open the 
choke and increase air into the carburetor for normal 
running.

8.

Connect devices

Connect your devices to the receptacles on the front panel. 

Start with the largest loads first.

10.

Start generator

The engine switch is located on the left side of the front 
power panel. Press the top “Start” position on the rocker 
switch to start the generator. Allow the switch to return to 
the run position once started.

7.

Turn breaker on

The breaker is located on the right side of the front power 

panel. Flip the breaker up to allow power to flow to the 

receptacles.

9.

13

Summary of Contents for DUAL FUEL HYBRID ELITE XP11500EH













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands