Form stitch mechanism of machine 525
Service Instructions 52Xi, 52Xi-75 - 00.0 - 11/2021
27
5
Form stitch mechanism of machine 525
Order
The machine setting must be carried out in the sequence as described
herein.
5.1
Tooth clearance setting of form stitch gear
Proper setting
The tooth clearance of the form stitch gear should be as small as possible.
No overlap instead of clearance, however, may arise in any mutual posi-
tion of the gears.
Pic. 17: Tooth clearance setting of form stitch gear
1.
Dismantle the arm cover (
2.
Loosen 2 screws (3) of the regulating ring (2).
3.
Loosen 4 screws (4) on the conical worm (1).
WARNING
Risk of injury from moving parts!
Crushing possible.
Switch off the machine before checking and setting.
(1) - Conical worm
(2) - Regulating ring
(3) - Screws
(4) - Screws
②
④
①
③
Summary of Contents for 52 i Series
