DURKOPP ADLER M-Type Delta D867, Additional Instructions

Page: 19 / 22

Changing the knives
Additional Instructions M-TYPE DELTA - 00.0 - 05/2020 17
6. Disassemble the thread-pulling knife (7).
7. Place the new thread-pulling knife.
Important
Make sure to place the thread-pulling knife with the correct orientation:
The slanted surface is found on the underside.
8. Place the new counter blade.
Important
Make sure to place the counter blade with the correct orientation:
The countersunk screws can be inserted properly into the holes.
9. Tighten the screws (6).
10. Screw in screw (5) and adjust the cutting pressure (

p. 7 ).
11. Place and align the clamping spring (3).
12. Tighten the screw (1).
13. Screw in screw (2) and adjust the clamping spring pressure (

p. 8 ).