DURKOPP ADLER DAC eco M-Type, Instructions For Use Manual

Page: 17 / 40

Components and functions
Instructions for use DAC eco M-Type - 01.0 - 10/2015 15
Fig. 2: Setpoint device
4.3 Proper use
The DAC eco M-Type controller is not a standalone unit; instead,
it is intended for installation in a machine of the class M-Type with
the subclass’ suffix M. For additional information refer to

2.2 Declaration of conformity , S. 7.
The controller is intended for industrial use.
The controller may only operate in rooms that are clean and dry.
Do not operate the controller when aerosols (sprays) or oxygen
is in use.
Proper use includes compliance with the operating, maintenance,
and repair conditions as specified by the manufacturer.
Only authorized persons may work on the controller (chapter

3 Safety , S. 9).
(1) - Push/pull rod
(2) - Spring pre-load (3) - Mounting parts
①
③
②
Improper use can result in hardware damage.
Follow all instructions provided.
CAUTION