DURKOPP ADLER 745-35-10 A, Service Instructions Manual

Page: 296 / 382

Programming
294 Service Instructions 745-35-10 S/745-35-10 A - 02.0 - 04/2017
User password setup
Information
To set up a user password, the user password option must be activated in
the
Global parameters
(

p. 249 ).
If a user password already exists, you need to enter this password before
you can create a new user password.
To activate password protection, you need to restart the machine.
When the machine starts up, you will be prompted to enter the user
password you created.
Fig. 255: User password setup (1)
To set up a user password:
1. Enter the desired 4-digit PIN.
2. Confirm with OK .
3. Re-enter the password (password check)
4. Confirm with OK .