DURKOPP ADLER 540 - 100, Operating Instructions Manual

Page: 8 / 49

1.1 Altering parameter values
1.1.1 Numerical values
Numerical values can be altered as follows:
–
Select the line with the value to be altered with the cursor keys
ñ
and
ò
.
–
Actuate the OK key.
The cursor flashes under a digit of the numerical value.
–
Change between the digits with the cursor keys
ï
and
ð
.
–
Increase or reduce the value of the selected digit with the cursor
keys
ñ
and
ò
.
In case of parameters which cannot optionally be altered another
possible parameter value is indicated by actuating the cursor keys
ñ
and
ò
.
–
Actuate the OK key.
The set value is taken over.
–
If the set value is not to be taken over, actuate the ESC key.
The initially set value is restored
1.1.2 Selection of a parameter
Some parameters allow to choose between several possibilities.
The parameter can be altered as follows:
–
Select the line with the value to be altered with the cursor keys
ñ
and
ò
.
–
Actuate the OK key.
–
Change between the possibilities with the cursor keys
ñ
and
ò
.
The selected parameter is displayed.
–
Actuate the OK key. The set parameter or value is taken over.
–
If the set parameter or value is not to be taken over, actuate the
ESC key.
The initially set parameter or value is restored.
4