FLASH PATTERNS
If you want to set the flash pattern to synchronize, touch the red wire to the yellow wire for 1
second. This change the flash pattern.
Note: If the light could not be synced please repeat STEP 1.
Grouping for simultaneous flash
:
Connecting all units with black, red and yellow wires will synchronize all lightheads. Touching
red wires to the yellow wires for 5 seconds will change the flash pattern (all units must be re
-
set individually on the first same pattern to remain synced together on the same pattern).
Grouping for alternating flash
:
Connecting all units with black, red and yellow wires will synchronize all lightheads. Touching
red wires to the yellow wires for 5 seconds will change the flash pattern (all heads must be
reset individually on the same pattern first to remain synced together on the same patterns).
Connectng one unit or some units green wires to the red wire will provide alternating flash.
If the units could not be alternating flash, please repeat STEP 1.
