DURAVIT SensoWash Starck f Lite, Operating Instructions Manual

Page: 33 / 54

Do NOT use the product if it is not working properly.
> Disconnect from the power supply immediately. Close the stop
valve to interrupt the water supply. Contact Duravit customer
service hotline.
> Avoid malfunctions and damage to the product as a result of
improper use.
CAUTION Health damage and potential product damage!
> Supply the device with cold drinking water from the main water
system.
> The new hose-sets supplied with the appliance are to be used and
old hose-sets should not be reused.
> If the product itself does not have electrical leakage protection
function, it must be installed in circuit where there is leakage pro-
tection device installed.
> Means for disconnection must be incorporated in the fixed wiring
in accordance with the wiring rules and having a contact
separation in all poles that provide full disconnection under
overvoltage category III conditions.
> Confirm that the grounding wire is 10 mm (⅜”) longer than the L
and N wire.
> Wire specification of cable is cross section 1 – 2.5mm
2
(17 – 14 AWG).
> Do NOT sit, stand or lean on the lid.
> Do NOT connect any waste water, grey water, industrial water, sea
water or other untreated or semi-treated water.
> Do NOT detach seat and lid for any purpose.
> Do NOT damage the surface of seat. If the surface of the seat is
damage, contact Duravit customer service hotline.
> DO NOT open and close seat and lid with excessive force.
> If the SensoWash
®
is moved from a cold location to a warm
location, condensation may form. Leave the unit switched off for a
few hours.
> Do NOT install the SensoWash
®
in rooms where there is a danger
of frost. The room temperature must not be less than 4 °C (39 °F).
> Do NOT place open fire sources, candles, cigarettes, or similar, on
the SensoWash
®
.
EN
31