31
Warm air dryer
The warm air dryer
temperature is not
warm enough.
The warm air dryer
temperature has
been set to "Off" or
"Low".
> Adjust the warm
air dryer temperature
to “Medium“ or
“High“.
7.4
The warm air dryer
function suddenly
stops.
The function
automatically stops
after 5 minutes.
This is normal.
The seat sensor
has lost contact
with the user due to
seated position
movement.
> Sit down and carry
out the function
again.
The warm air dryer
function does not
work.
No one has sat
down or the person
is not sitting on the
seat sensor.
> Sit down and carry
out the function
again.
Problem
Potential cause
Solution
Ch.
Integrated flushing system
SensoWash®
does not
flush.
The time between two
flushes is too short.
This is normal.
The water tank must be
refilled. This takes
approx. 25 seconds.
The stop valve is closed. Open the stop valve.
> Remove right side
panel.
> Open stop valve.
> Install right side panel.
„Auto flush“ is not
working.
„Auto flush“ is
deactivated.
> Activate „Auto flush“.
7.6
The user was not seated
during the use of the
toilet.
This is normal. „Auto
flush“ is only working
when the user is seated.
> Sit on the seat for more
than 6 seconds.
The user set less than 6
seconds on the seat.
This is normal.
> Sit on the seat for more
than 6 seconds.
