regarding the mounting instructions
These mounting instructions come as part of the
Duravit whirltub and should be read carefully prior to
installation.
Explanation of the key words and symbols
DaNGEr!
At high risk of fatal hazards or serious
injuries
NOTE!
In the case of potential damage to
property
Link to the
Electrical Installation
section
Link to the
installation information
in this
section
Inspection (e.g. for scratches)
Indication of the length of time (e.g. 10 minutes)
Inspect to check for leak tightness
Indication of the temperature
Control unit (Number depends on the whirl
system)
Target group and qualification
The whirltub must only be installed by trained plumbing
engineers. The electrical installation may only be carried
out by qualified electricians.
NOTE!
Local installation regulations and any country
specific standards must be observed at all times.
Safety information
DaNGEr! risk of fatal electric shock.
> Do NOT remove any whirltub components.
Installation information
Please read preinstallation datasheets prior to the
installation. These are available to download on the
Internet at www.duravit.com.
NOTE!
If the tray has a base inlet, a pipe interrupt must always
be installed onsite.
> See installation diagram.
22
Checking the whirl system (Diagram 22)
> Switch on the whirl system for 10 minutes:
Run this through once completely in the case of
circuits with different levels of intensity.
> Leave the water in the bathtub and wait 10
minutes.
> Check to make sure that it is leaktight.
> If adjustments are required, repeat the check.
24
Maintenance (Diagram 24)
> The maintenance panel must be accessible and
removable for maintenance.
6
WH_M_Paiova_angeformte_Verkleidung_Monolith/15.12.6
en
Important information
Seitenansicht
Lateral view
150
> =
Gezeichnet
Drafted
GeŠndert
Modified
GeprŸft
Certified
Datum
Date
Name
Ma§stab
Scale
Name
Bezeichnung
Description
Artikel-Nr.
Model-No.
Technische Verbesserungen und optische VerŠnderungen an den abgebildeten Produkten behalten wir uns vor.
We reserve the right to make technical improvements and enhance the appearance of the products shown.
1:20
1:10
1:5
X
# W-
T
-
Allgaier
000000 - 00 - 0
08.10.13
000000
Schematische Zeichnung mit Rohrunterbrecher
Zeichnung
Drawing
Spezial Ab-und †berlaufgarnitur mit Bodenzulauf
fŸr Badewanne
Special waste and overflow with base inlet
for bathtubs
WLT
08.10.13
Summary of Contents for Paiova
