![background image](http://html.mh-extra.com/html/duravit/jet-project/jet-project_operating-instructions-manual_2541871025.webp)
25
8. Troubleshooting support
CAUTION!
The whirltub may be repaired only by qualified plumbers and electricians.
Problem
Potential cause
Solution
Foaming
Soap or shampoo in the
bathwater.
>
Switch off the whirlpool
system.
>
Fill the tub with fresh
water.
The whirlpool system runs
only briefly.
Water level too low.
>
Add water until the water
level is about 5 cm above
the uppermost nozzle.
>
Press “Jet” for a while.
Whirl system does not
start.
Mains switch switched off.
>
Switch on at mains.
Mains fuse is switched off.
>
Switch on mains circuit
breaker.
Ground-faultswitch (RCD) or
circuit breaker has tripped.
>
Disconnect tub from mains.
>
Call Customer Service.
Sound volume / quality
cannot be changed.
Data not compatible.
>
Check whether the audio
source supports the A2DP
protocol.
9. Maintenance
> Check the residual-current circuit-breaker regularly as described in its operating
instructions.
10. Technical Data
10.1 Identification Plate
The identification plate is on the back page of the Operating Instructions.
This product conforms to all the appropriate EU guidelines.
Summary of Contents for Jet Project
