DURAVIT D.1e, Instructions For Mounting And Use

Page: 7 / 72

600
600
2250
2
1
0
The electrical installation should only be
carried out by qualified electricians.
Explanation of the key words and symbols
DANGER
Indicates a hazardous situation
which will result in death or serious
injury if not avoided.
Technical data
Rated voltage 100 – 240 V
Frequency 50/60 Hz
Power consumption in standby < 0.5 W
Max. power consumption
15 W
Protection class IP X4
Circuit breaker I
N
= 16 A
Residual current circuit
breaker RCD
I
∆N
≤ 30 mA
Safety instructions for the electrical
installation
DANGER
Risk of fatal electric shock
> Carry out the electrical installation in
accordance with the national, European
and international directives and standards.
> Switch off the power supply before the
installation.
> Prevent the power supply from being
switched on accidentally. Prevent recon-
nection according to DIN VDE 0105-100.
> Connect the circuit breaker and residual
current circuit breaker (RCD) that
disconnects all phases from the mains.
> If the power supply cable of this unit is
damaged, the power supply cable must
be replaced by the manufacturer, their
Customer Services or a similarly qualified
person.
> Observe the protection zones.
> Do not install the power supply in
protection area 0 or 1.
> Place the socket outside the protection
areas.
> If necessary, install the tap unit in
protection area 2.
Safety areas in accordance with
DIN VDE 0100-701
MAL_57325/20.07.3
7
en