
5
CEILING
SUPPORT **
2 ft
MIN.
10 ft
3 ft
MIN.
ATTIC
INSULATION
SHIELD
2" MIN.
* 18"
MINIMUM
* CLEARANCE CAN BE REDUCED IF A LISTED CHIMNEY
CONNECTOR IS USED.
** CLEARANCES FOR THE 7’’ CHIMNEY SUPPORT WILL BE
LESS THEN 2’’.
Figure 2
GENERAL INSTALLATION NOTES (CONT’D)
1
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
7.5" MIN
RAIN CAP
COLLAR
To remove cap, unscrew the collar screw to
untighten the collar.
Pull on the cap to remove it from the chimney.
To put the cap back in place, slide it over the
chimney and then tighten the collar using the col-
lar screw.
CAP REMOVAL FOR MAINTENANCE
Figure 3
Summary of Contents for DPC2
Page 12: ...12...