DURAVANT FMH BestReach, Operator'S Manual

Page: 18 / 69

17
Return switch to the down position for operation.
To return to default settings of 3 seconds delay, flip switch up and down three times in 2 sec.
The default settings will be reinstated and the switch is in down position for operation.
INDEXING OPTION AND PHOTOEYE PROGRAMMING:
This conveyor can be equipped with an electronic package indexing option.
The indexing option is switched on and off using a selector switch on the operator control
panel. In the on position, the conveyor is in normal operating mode. When the switch is off, the
conveyor will index packages a programmable distance after they pass through the indexing
photoeye located on the transition.
Programming this distance follows the same procedure as the package stop photoeye
except you will cover the indexing photoeye for the desired conveyor belt run time after a
package is detected on the transition.
PROGRAMMING PACKAGE STOP PHOTOEYES (continued)
OPERATING INSTRUCTIONS
(CONT)
FMH Conveyors Operator’s Manual
BestReach Rigid Belt Conveyor