Page
38
Dura
®
LIFESTYLE
LIFESTYLE
Kinloch
6.5 Bottom rail stop attachment
• Hook stop behind lip in rail.
• Secure the rail from underneath with 6mm screws (G).
• Trim weatherseal flush with end of the bottom rail.
roll-a-guide
a
bottom rail
6.6 Guides installation
• Ensure curtain overlaps equally on both sides, and cut the guides the correct
length (top of guides is level with top of the brackets while the guides bottom
is touching the floor).
• Slide 2 guide clips (E) into each guide. Position the bottom clip 200mm from
the floor with the rest evenly spaced along the guide.
• Position 1 guide over the edge of the door curtain. Mark and drill the top
fixed guide clip and secure it using 40mmx8mm coach screw and washer,
allowing 3mm clearance between inside of guide and plastic roll-a-guide.
Ensuring guide is plumb, fix remaining clips.
• Repeat with second guide.
• Remove the wooden chock and slowly lower the door. Removing the plastic wrap as you pull the door
down. Reposition the guides as necessary to allow smooth and even operation with 0>1mm clearances.
• Ensure door curtain enters guides smoothly. It will be necessary to adjust the guide lead in to achieve this.
