13
KS1 BARGE & SPOUTING
Step 1:
Position Barge Flashing on End wall. Ensure
that the front of the Barge is flush with the
front of the Roof sheets. Rivet Barge through
the Roof sheet Rib using 1 rivet at the front,
middle and back of the Barge. Repeat on oth-
er side.
Step 2:
Position Spouting at the front of the roof
ensuring that the ends are flush with the
End of the Barge flashings. Rivet spout-
ing onto the Roof at every second Rib.
Use 2 rivets per end and rivet into Barge
Flashing.
Step 3:
Position Ridge Cap at the back of the
roof ensuring that the ends are flush with
the End of the Barge flashings. Rivet
Ridge Cap onto the Roof and onto the
Back Wall sheet through every second
Rib. Use 2 rivets per end and rivet into
Barge Flashing.
