3
IMPORTANT SAFETY INFORMATION
Please read these instructions carefully before use and retain for future
reference.
Important safety information. Read the instructions carefully.
High voltage. Danger.
Ground.
Double Insulation (Class II safety equipment).
Fuse must be replaced as per the specification herein.
!
200mA/250V
•
When using electrical appliances basic safety precautions should always be
followed.
•
Do not exceed the protection limit values specified for each range range of
measurement.
•
Never use the meter to measure voltages that might exceed 600V above earth
ground in category II installations.
•
When the value scale to be measured is unknown beforehand, set the range
selector to the highest position.
•
Before rotating the range selector to change the functions disconnect the test
leads from the circuit under test.
•
When measuring a TV set or switching power supply, watch out for pulses in the
circuit that may damage the meter.
•
Before working with and measuring voltages higher than 60V DC or 30V AC RMS,
keep your fingers behind the probe barriers.
•
Before attempting to insert transistors for testing, always be sure that the test
leads have been disconnected from any measurement circuits.
•
Components should not be connected to the hFE socket when making voltage
measurements with test leads.
•
Do not perform resistance measurements on live circuits.
•
The instrument can only be used in conjunction with the test leads supplied. If
necessary, they must be replaced with the same type and specification.
WHAT’S INCLUDED?
•
One instruction manual
•
One digital multimeter
•
Set of test leads
•
One 9V battery, NEDA 1604 6F22 006P type
•
Holster (optional)
This meter is a handheld 3½ digital multimeter used for measuring DC and AC voltage,
DC current, resistsance, diode, transistor and continuity.
