12
Pairing the handheld transmitter to the PLP-REM-300
All handheld transmitters are already paired in the factory and ready to use.
In case a problem arises, the pairing process can be done as below:
Pairing Indicator LED
(blue)
Pairing button
1) Press the pairing button on the circuit board, inside the PLP-REM-300
---> The BLUE LED will start to blink
2) Within 25 seconds, push any button on the handheld transmitter.
---> If the remote is paired correctly, the BLUE LED will flash slowly for 5 times
---> UNPAIRING:
See RESET procedure: page 18
DuraLink
Summary of Contents for LINK Driver PLP-REM-300
Page 2: ...2...
