14
C M F - 4 3 0
O P E R A T I N G I N S T R U C T I O N S
3.2 Setup and Adjustments
3.2.1 Hitch Adjustments
The hitch is adjustable so that the machine is parallel to the ground when attached to the tractor drawbar. This is
accomplished by removing the two mounting bolts and reinstalling them with the hitch at the proper height. The
distance from the end of the P.T.O. shaft on the tractor to the center of the drawbar hitch pin hole should be 16” (41cm),
and the height from the top of the drawbar to the centerline of the P.T.O, should be 8” (20 cm).
The hitch pin should be of proper diameter to prevent movement and length to extend through all components of the
hitch. The pin should be secured with a hairpin clip or suitable device to prevent the loss of the pin.
3.2.2 Jack
An adjustable jack is provided with the machine to support the hitch when the machine is disconnected from the tractor.
The jack must only be used on firm, level ground or similar base to prevent it from sinking.
Warning:
Never unhook the CMF-430 with material in tub.
When unhooking the machine remove the jack pin and move the jack from the storage location to the hitch position and
reinstall the pin. Crank the jack until the hitch is no longer supported by the drawbar of the tractor. The hitch pin now
can be removed.
Warning:
Never use the jack without reinstalling the jack pin.
figure 3.1
Hitch adjustments
Summary of Contents for HAYBUSTER CMF-430
