Duratech HAYBUSTER CMF-430, Operating Instructions And Parts List Manual

Page: 23 / 108

13
C M F - 4 3 0 O P E R A T I N G I N S T R U C T I O N S
Section 3: Operation
To insure long life and economical operation, we highly recommend the operator of the CMF-430 be thoroughly
instructed in the maintenance and operation of the machine. There is no substitute for a sound preventative maintenance
program and well trained operator.
Prior to starting the engine of the tractor, we recommend the operator make a visual inspection of the unit. This can be
done as the lubrication is being carried out. Any items that are worn, broken, missing or needing adjustment must be
serviced accordingly before operating the CMF-430.
3.1 Pre-starting inspection instructions
WARNING: Before inspecting the machine, use the normal shut-down procedure in Section 3.11 .
Check the following:
q
Hydraulic components for leaks or damage.
Warning: Hydraulic fluid escaping under pressure can be almost invisible and can have sufficient
force to penetrate the skin. When searching for suspected leaks, use a piece of wood or cardboard
rather than your hands. If injured, seek medical attention immediately to prevent serious infection or
reaction.
q
Check for loose bolts, worn or broken parts.
q
Lug nuts for tightness. Torque to 130-184 ft lbs. (18-25 kgm)
q
Condition of tire rims.
q
Tires for proper air pressure. (44 PSI or 300 kPa cold)
q
Installation and condition of shields.
q
Installations of slow moving vehicle (SMV) sign if required.
q
Condition of decals.
q
Gearbox oil levels.