25
G P - 5 0 G R A I N P R O C E S S O R
O P E R A T I N G I N S T R U C T I O N S
2.4 Shutdown procedure
2.4.1 Normal shutdown procedure
CAUTION:
At full speed, energy is stored in the rotor.
Do not use the
tractor PTO brake to stop
the rotor.
WARNING:
The stored up energy in the rotor causes it to rotate longer after disengaging the tractor
PTO. Before performing any maintenance on the machine or getting into the tub, be sure rotor and all
moving parts have come to a complete stop
Before working on or near the GP-50 Grain Processor for any reason, including servicing, inspecting or unclogging the
machine:
1. Run the GP-50 Grain Processor until discharge conveyor is empty, and grind as much of the material in
the hopper as possible.
2. Reduce engine speed to idle.
3. Disengage PTO.
4. Disengage hydraulics.
5. Place transmission in park and set park brake.
6. Shut off tractor engine and remove key.
7. Wait for all movement to stop.
8. Disconnect PTO driveline from tractor.
2.4.2 Emergency shutdown procedure
Disengage PTO and tractor hydraulics.
