5
I-manSTANDGASexp-v02
1. PRESENTATION
STANDGAS HC & HC PRO
are stand-alone detectors for explosive gases using catalytic technology (pellistor) for a detection
range from 0 to 100% LEL. Silicon vapours resistant sensors (HDMS)
Available formats and gases
STANDGAS HC
Available for natural gas-methane, butane-propane, and hydrogen.
STANDGAS HC PRO
Available for natural gas-methane, hydrogen, butane, propane, heptane, hexane, pentane, methanol,styrene,
ethane, ethanol, ethylene, propylene, acetone, ammonia, acetylene, cyclo-hexane, cyclo-pentane,
dioxane, butyl acetate, ethyl acetate,acetic acid, iso-butyl alcohol, iso-propyl alcohol, decane, benzene,
octane, methyl ethyl ketone, nonane, propanol, toluene, xylene. Other gases, consult.
Other features
• Optical indications for sensor fault.
•
Programmable alarm relay.
•
Selection of gas to detec using a jumper.
•
Silicon vapours resistant sensors (HDMS).
Do not use these detectors in environments where there might be presence of hydrogen sulphide, fluorine, methyl chloride,
trichloroethylene, sulphur dioxide, silicon vapours or sulphuric acid: the presence of these gases could either inhibit
sensor’s response or damage it.
