15
• The lower scale with the rectangular display is an exclusion indicator. If all metals are acti-
vated, all segments illuminate. In exclusion mode, the display light is extinguished under
the symbol of each excluded metal. This means that a discovery of this type of metal is not
displayed. In locating mode, this indicator is a scale of the signal strength. As you get closer
to the object, more segments will light up.
• The coil depths display consists of 4 segments for 2, 4, 6 and 8+ inches. This value refers
to a silver 25 ¢ piece in neutral earth and indicates the approximate depth.
• The sensitivity display is divided into 5 segments. You can adjust the sensitivity with the
Sensitivity /-.
• Location - hold the location button until the locating indicator lights up. The device is now
in non-motion mode in order to precisely locate the found object.
• The battery indicator indicates the battery charge in 4 segments. When all segments are
lit, sufficient power available.
Operating Panel and Buttons
1 Ground balance controller
2 Sensitivity level
3 Discrimination key
4 Exclusion button
5 Localisation button
6 On / off button
7 Mode button
Using the on / off button to turn the device on / off. Press the mode button to select from
the different modes:
All metals:
The unit responds to all metals. The discrimination key has no function in this mode.
Discrimination
: Use the +/- buttons to exclude unwanted metals. Only 10 ¢, 25 ¢, 50 ¢
and $1 cannot be excluded.
Treasure mode
: In this mode, iron will be excluded. The discrimination key has no func
-
tion in this mode.
Custom
: You can specify what you want to search for. Press the discrimination /-
to select the unwanted metal on the upper scale, then press the exclusion button.
Summary of Contents for 10004781
Page 1: ...10004781 Metalldetektor ...