background image

www.duralloy.net.au

  |  

1300 369 456 

Fumes And Gases

WARNING!

Welding produces fumes and gases. Breathing these 
fumes and gases can be hazardous to your health.

1.   Keep your head out of the fumes. Do not breathe the fumes.

2.   If inside, ventilate the area and/or use an exhaust at the arc to 

remove welding fumes and gases.

3.   If ventilation is poor, use an approved air-supplied respirator.

4.   Read the Safety Data Sheets (SDS) and the manufacturer’s 

instruction for the metals, consumables, coatings, and 
cleaners.

5.   Work in a confined space only if it is well ventilated, or while 

wearing an air-supplied respirator. Shielding ga es used for 
welding can displace air causing injury or death. Be sure the 
breathing air is safe.

6.   Do not weld in locations near degreasing, cleaning, or 

spraying operations. The heat and rays of the arc can react 
with vapours to form highly toxic and irritating gases.

7.   Do not weld on coated metals, such as galvanized, lead, or 

cadmium plated steel, unless the coating is removed from the 
weld area, the area is well ventilated, and if necessary, while 
wearing an air- supplied respirator. The coatings and any 
metals containing these elements can give of toxic fumes if 
welded.

19

MIG 200

OWNER’S MANUAL

Summary of Contents for MIG 200

























Reviews: