NEVER LEAVE THE HEATER
UNATTENDED WHILE BURNING!
11
13
. Slide the wick adjuster
assembly down the draft tuve.
Position the adjuster shaft to
the front of the heater.
15
. Replace the safety shut-off
assembly.
14
. Sung 4 wing nuts on the
mounting stud, but do not
tighten.
19
. Check the function of safety
shut-off mechanism by
pushing the extinguish button
to upset the pendulum.
21
. Replace the Cabinet & Grill
assembly and fasten to the
heater with 3 screws.
Be sure to check that the wick
is set at the correct height of
5/6”(8mm) after reassembling
the heater.
20
. Reinstall the wind cover.
16
. Raise the wick the full “up”
position, and evently tighten
wing nuts in several steps.
18
. Check for correct clearance
between wick holder and draft
tube. It should be the same all
around.
17
. Check height of wick.
It should be 5/16” above collar
