DURAG D-LX 200, Manual

Page: 88 / 116

Modbus
8.4 DURAG Modbus DataMap
Modbus register and address information for the
D
− LX 200, D − LX 720
Parameter Description
Register
Quantity Register
Addr.[dec/hex]
Data
format
Content
Device information
Manufacturer name 10 0 / 0x0000 ASCII DURAG GmbH
\x00\x00 \x00\x00
\x00\x00 \x00\x00 \x00\x00
Device name 10 10 / 0x000A ASCII D − LX 200
\x00\x00 \x00\x00
\x00\x00 \x00\x00 \x00\x00 \x00\x00
if req.
D − LX 720
\x00\x00 \x00\x00
\x00\x00 \x00\x00 \x00\x00 \x00\x00
Device type 4 20 / 0x0014 BCD
0011 . 7320 . xxxx . xxxx
if req. 0011 . 7321 . xxxx . xxxx
Device serial number 5 24 /0x0018 ASCII 1234567890
Primary device
firmware revision 2 34 / 0x0022 BCD 01 . 00 R 0000
Secondary device
firmware revision 2 36 / 0x0024 BCD 01 . 00 R 0000
Parameter Description
Register
Quantity Register
Addr.[dec/hex]
Data
format
Content
Bus information
Modbus address 1 128 / 0x0080 Word 1..247
Device protocol revision
common 1 129 / 0x0081 BCD 01.00
Device protocol revision
specific 1 130 / 0x0082 BCD 01.00
Actual Date / Time 2 131 / 0x0083 Date Time
UnixTimeCode Read/Write
Baud rate 1 133 / 0x0085 Word 9600bps[0]/19200bps[1]
Table 8.10: Modbus register and address information
The parameters described below and the Modbus registers for the flame
monitor D
− LX 200, D − LX 720 are contained in the "
device-specific"
address
space of the DURAG Modbus DataMap.
88
D − LX 200, D − LX 720