DURAG D-LX 200, Manual

Page: 74 / 116

D − LX 200 InformationCentre PC Version
7.3.3 System Settings
The "System Settings" display shows all static and parameterizable values,
such as the threshold values for "Threshold Intensity" and "Threshold
Frequency", the "Safety Time", the current output (0-20 / 4-20mA), the serial
number, the device type, the interface setting, the firmware versions and the
default file in which data is saved when the "Rec." key is activated. The display
is divided into
Settings Range A and Settings Range B.
Figure 7.6: System Settings
Threshold Intensity (1
st
value) Displays setting of the Intens. rotary switch
Switch / Value (2
nd
value) Intensity threshold
Threshold Frequency (1
st
value) Displays setting of the Freq. rotary switch
Switch / Value (2
nd
value) Frequency threshold
Gain-Characteristic Displays gain characteristic curve
Firmware Firmware version/revision for D-LX 200
Connection Setting
Displays the interface and
the Modbus slave address used
Current Output Setting Current output 0..20mA or 4..20mA
Paths
Storage path + name of archive file in which the measured
data is recorded
Data Count Number of data records contained in the archive file
Safety Time Displays the safety time
SerialNo Serial number
Dev.Name
Device type
Table 7.1: System Settings
74
D − LX 200, D − LX 720