Fitting the Optional Floats.
DURAFLY PRIME TUNDRA 1200MM
READY TO FLY VERSION
1.
Remove the wheeled landing gear and
replace the screws. Clip into the slot the front
float support legs.
2.
Unscrew the strut retaining clips at the rear,
slot in the rear float support legs, and replace
the retaining clips.
3.
Slot the float cross braces into the inside
holes of the float front and rear mounting
points.
4.
With the floats assembly on a flat surface,
lower the Prime Tundra onto the floats.
5.
Push the float support legs into the outer
holes of the float mounting points.
27
6.
Use the supplied M2 x 8mm screws to retain
the supports to the floats.