www.tsicustomerservice.com
A606
6
OPERATION INSTRUCTIONS
Function
POWER
The POWER button supplies power to all the functions of
the stove. Pressing the POWER button again the stove will
be put in standby mode. This will turn off all functions at
once but will hold the settings in the memory. By
pressing the Power button again the unit will turn on at the
same settings.
With the power on press and hold the Power button on
the control panel for 10 seconds to disable or re-enable the
heater function. Once disable or re-enabled the emberbed
lights will flash multiple times.
FLAME
HEATER
Icon
Description
There are 5 brightness levels that can be selected and
OFF (00) setting.
Settings F5 - F1 decrease in brightness.
Pressing the timer button will cycle through the timer
settings; 30 minutes, 1 Hour, 2H, 3H, 4H, 5H, 6H, 7H, 8H,
9H and off (00).
TIMER
NIGHT MODE
Toggle between night mode which reduces the halogen
and reduces the brightness of the heater for night use.
“ ” will be displayed when night mode is activated.
The stove contains a fan forced infrared element heater.
The thermostat setting range is 62°F - 82°F(17°C - 27°C) or conti-
nously ON or OFF(00).
The thermostat is adjustable by 2°F or 1°C increments by
pressing the HEATER button on the control panel.
The up and down buttons “ ” on the remote will
increase / decrease temperature setting.
To change between °F and °C press and hold the
HEATER button on the control panel for 3 seconds.
