Durafit Tiger, User Manual

Page: 18 / 24

18
“To give anything less than your best is to sacrifice the gift.”
Align and Tighten the Belt of the Treadmill
ALIGN THE BELT: Due to its use, the belt can move off center. If the
belt has moved to the left, start treadmill and increase the speed to
3MPH .Use the 6mm Wrench to turn the fixed left bolt clockwise or turn
the fixed right bolt counterclockwise. Don’t tighten the belt too much in
order to be able to walk. Repeat this procedure until the belt is properly
aligned.
b) Stop the running belt and fold the treadmill.
c) Turn over the running belt at the back of the main frame.
Insert the lubricant pot as deep as possible into the middle of
the running belt. Apply the lubricant onto the inner side of the
running belt.
Lubricate both sides of the running belt. After the lubrication is
completed, start the machine at 1km/h to let the running belt bring
silicon all over the board.
After running for a period of time, the treadmill must be configured with
special cymene silicone oil for lubrication.
Suggestion: Do not lubricate more than what you need to.
Remember: Regular and reasonable lubrication is to improve the lifespan of
your treadmill.