Durafit DFISA001, Operating Instructions Manual

Page: 6 / 14

- 5 -
（
2
）
“PROG”(could be pressed continuously to your expected mode)
Press the “PROG” key once again to enter “48 direct selected programs” there are 48
programs, “P1 - P48” the first 24 programs without incline, the last 24 programs including incline.
So please choose carefully.
（
3
）
“incline short cut key”
Press this key, the incline goes directly to the chosen height.
（
4
）
“speed short cut key”
Under running condition, press this key, speed can be set to the value directly.
（
5
）
“incline up”
Press this key, you can choose the incline you need, except for the alarm condition.
（
6
）
“speed down”
Under running condition, press this key, speed can be speeded down to the one you need.
（
7
）
Start: Under ready condition, press this key, it runs at the speed of 1.0km/h.
（
8
）
“speed up”
Under running condition, press this key, speed can be speeded up to the one you need.
（
9
）
“Mode”
Under ready condition, press this key to set time, distance and calorie accordingly. Press “set
- up” or “set - down” keys to set the value of time, distance and calorie. Then press “start” key,
the machine will run at 1.0km/h. And the set figures will be counted down, when it comes t
o
“0”, machine stops.
（
10
）
“incline down”
Press this key, you can choose the incline you need, except for the alarm condition.
（
11
）
“safety key”
Under urgent condition, pull this key, machine stops immediately.
（
12
）
Stop: Under running condition, press this key, if it runs at speed more than 3.5km/h, it will
slow down then stop. During this stopping process, other keys are not available. If it runs at
speed less than 3km/h, then it stops immediately.
5.2 Unload operating
1 . Insert power plug into the socket with earth wire, tur n the switch to “1” position which is on
the frame
2 . Put the safe key in the right position, then circuit is on, press “on/off”, keep it run in unload
condition. Test the condition of running belt (testing from low speed to high ones), after testing,
press
“on/off”.
3 . If everything is ok, then start to run.